F-4 Phantom and A/36A / P-51A Updates

PREVIEW

Aerocraft Models, 1/32 scale

Aerocraft Model has sent information and images of their four latest releases:

ACM32067 - McDonnell Douglas Phantom F4 Exhaust set for the Revell 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-exhaust-set-for-the-revell-132-kits-271-p.asp

This is a new 3d printed set to improve the kit parts in the exhaust area. As can be seen it is a very comprehensive set with very fine details to greatly enhance your kit. Some care and planning will be needed to add the main exhaust tubes into the Revell fuselage, add the actual exhausts at the end of assembly and painting. Note the exhaust style is the J79-GE-15. The 3D CAD work has been expertly done by Richard Cullen.

ACM32070 - McDonnell Douglas Phantom F4 Exhaust set for the Tamiya C/D 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-exhaust-set-for-the-tamiya-cd-132-kits-275-p.asp

This is a new 3d printed set to improve the kit parts in the exhaust area of the Tamiya F-4 C/D kits with the J79-GE-15 engine type. As can be seen it is a very comprehensive set with very fine details to greatly enhance your kit. This is a direct replacement set of parts for the kit. Add actual exhausts at the end of assembly and painting. Note the line diagram shows both style of exhausts that are offered between the J79-GE-15 and the J79-GE-17, note only one matching pair is supplied per type. The 3D CAD work has been expertly done by Richard Cullen.

ACM32069 - McDonnell Douglas Phantom F4 Exhaust set for the Tamiya J, E and EJ 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-exhaust-set-for-the-tamiya-j-e-and-ej-132-kits-273-p.asp

This is a new 3d printed set to improve the kit parts in the exhaust area of the Tamiya F-4J, E and EJ kits with the J79-GE-17 engine type. As can be seen it is a very comprehensive set with very fine details to greatly enhance your kit. This is a direct replacement set of parts for the kit. Add actual exhausts at the end of assembly and painting. Note the line diagram shows both style of exhausts that are offered between the J79-GE-15 and the J79-GE-17, note only one matching pair is supplied per type. The 3D CAD work has been expertly done by Richard Cullen.

ACM32072 - McDonnell Douglas Phantom F4 Intake set for the Tamiya C, D, E, EJ 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-intake-set-for-the-tamiya-c-d-e-ej-132-kits-277-p.asp

This is a new 3d printed set to improve the kit parts in the intake area of the Tamiya F-4 C, D, E, EJ kits or any USAF type. As can be seen it is a comprehensive set with very fine details to greatly enhance your kit. The parts included are the relevant stator (USAF), 1st compressor stage and then there is an option of either partially opened or fully open guide vanes.This is a direct replacement set of parts for the kit. Modellers may choose to add this to the Revell kit but you will need to sort out the fitment yourself. The 3D CAD work has been expertly done by Richard Cullen.

ACM32071 - McDonnell Douglas Phantom F4 Intake set for the Tamiya J 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-intake-set-for-the-tamiya-j-132-kits-279-p.asp

This is a new 3d printed set to improve the kit parts in the intake area of the Tamiya F-4 J kits or any USN type. As can be seen it is a comprehensive set with very fine details to greatly enhance your kit. The parts included are the relevant stator (USN), 1st compressor stage and then there is an option of either partially opened or fully open guide vanes. This is a direct replacement set of parts for the kit. Modellers may choose to add this to the Revell kit but you will need to sort out the fitment yourself. The 3D CAD work has been expertly done by Richard Cullen.

ACM32066 - McDonnell Douglas Phantom F4-E Nose cone for the Revell 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-e-nose-cone-for-the-revell-132-kits-267-p.asp

This a new 3D printed nose cone that has been developed as an improvement for the Revell Phantoms. The 3D CAD work has been expertly done by Richard Cullen.

ACM32067 - McDonnell Douglas Phantom F4-EJ Kai Nose cone for the Revell 1/32 kits

https://www.aerocraftmodels.com/mcdonnell-douglas-phantom-f4-ej-kai-nose-cone-for-the-revell-132-kits-268-p.asp

This a new 3D printed nose cone that has been developed as an improvement for the Revell Phantoms and allow the specific version to be made. The 3D CAD work has been expertly done by Richard Cullen.

ACM32064 - North American A-36A Spinner and propeller blades for 1/32 Hobby Craft kit

https://www.aerocraftmodels.com/north-american-a-36a-spinner-and-propeller-blades-for-132-hobby-craft-kit-263-p.asp

This is a spinner and propeller blade set to replace the kit parts of the 1/32 scale Hobby Craft kit. There is a small undercut to the spinner backing plate that enables a direct replacement of the kit part, as the kit has a slightly domed face where the propeller shaft extends, this allows it to fit with the correct look and spacing between spinner and fuselage. This has the wider paddle type blades see product ACM32065 for the narrow blades. This set is 3D printed parts.

ACM32065 - North American P-51A Spinner and propeller blades for 1/32 Hobby Craft kit

https://www.aerocraftmodels.com/north-american-p-51a-spinner-and-propeller-blades-for-132-hobby-craft-kit-265-p.asp

This is a spinner and propeller blade set to replace the kit parts of the 1/32 scale Hobby Craft kit. There is a small undercut to the spinner backing plate that enables a direct replacement of the kit part, as the kit has a slightly domed face where the propeller shaft extends, this allows it to fit with the correct look and spacing between spinner and fuselage. This has the narrow blade, see product ACM32064 for the wider paddle type blades. This set is 3D printed parts.

Thanks to Aerocraft Models for the information and images.

Preview Text and Images Copyright © 2023 by Aerocraft Models
Page Created 28 May, 2024
Last updated 31 August, 2024

Back to HyperScale Main Page

Back to Reviews Page