Nakajima Ki-84 Hayate
Special Attack Units

Arma Hobby, 1/72 scale

Reviewed by Brett Green

The Nakajima Ki-84 Hayate is a single-seat fighter flown by the Imperial Japanese Army Air Service in the last two years of World War II.

The Allied reporting name was "Frank. The Japanese Army designation was Army Type 4 Fighter.

The Ki-84 is generally considered the best Japanese fighter to operate in large numbers during the conflict. The aircraft boasted high speeds and excellent manoeuvrability with an armament (up to two 30 mm and two 20 mm cannon) that gave it formidable firepower.

The Ki-84's performance matched that of any single-engine Allied fighter it faced, and its operational ceiling enabled it to intercept high-flying B-29 Superfortress bombers.

Pilots and crews in the field learned to take care with the plane's high-maintenance Nakajima Homare engine and a landing gear prone to buckling.

The difficulties of Japan's situation late in the war took a toll on the aircraft's field performance as manufacturing defects multiplied, quality fuel proved difficult to procure and experienced pilots grew scarce. Nevertheless, a well-maintained Ki-84 was Japan's fastest fighter.

A total of 3,514 aircraft were built.*

* Historical background adapted from Wikipedia

Arma Hobby launched their all-new 1/72 scale Hayate family with Kit No. 70051 in their Expert Set series in May 2022. The Expert Series includes photo-etched parts, kaubuki yellow paper masks and six marking options. This was followed by the no-frills "Model Kit" boxing of their Ki-84 Hayate with plastic parts and two marking options in mid-2022.

Now Arma has now released a mid-range offering with self-adhesive masks and three marking options, but no photo-etched parts.

The theme of this release is Special Attack Squadrons - the infamous Kamikaze.

This is a limited kit that will not be re-issued, so if you like the markings, grab one now!

Optional parts are supplied to allow eiher the Ko or Otsu versions to be built straight from the box.

Arma Hobby's 1/72 scale Nakajima Ki-84 Hayate "Model Kit" comprises 66 parts in grey plastic, four parts in clear plastic, canopy and wheel masks and decals for three marking options.

• 
• 
• 
• 
• 

• 
• 
• 
• 
• 

• 

Thumbnail panels:

The grey plastic parts are delivered on one large and one small sprues. Moulding quality is excellent with no flaws or visible moulding imperfections on my sample. The plastic parts boast a luxurious satin texture. Arma’s website advises that long-run metal moulds are used for their kit production, and it really does show.

Being a long-run kit, the parts are moulded with all the alignment aids that you would expect including locating pins, holes and tabs.

Surface textures are just gorgeous. Recessed panel lines, circular fastener heads and other structural details are very fine.

The fuselage is supplied as left and right halves with a few elements that allow some important options.

The most obvious is the separate cockpit coaming and mid-upper fuselage insert. Two inserts are included. One insert is designed for a closed canopy. The second insert is designed for an open canopy. It sounds a bit confusing here but the instructions are pretty clear.

Some cockpit sidewall detail is moulded directly to the inside of the fuselage halves. Additional separate parts include a plastic cockpit floor, throttle quadrant; instrument panel, a moulded pair of rudder pedals, control column, radios and more.

The instrument panel and switch panel feature raised detail that will respond well to careful dry brushing, with a decal overlay option also included.

The seat is moulded with six raised circles and arow of raised rivets on the backrest. The real seat was actually perforated, so you may wish to drill out the circles in the seat backrest. Decal harness straps are offered too.

The engine is suitably busy with two rows of cylinders featuring fine cooling fins, upper and lower pushrod halves, exhaust manifolds and crankcase cover.

Alternative lower fuselage intake fairings are offered. Two styles of mesh intake are also included.

The wing parts are full span, top and bottom. They are thin at the trailing edges. I particularly like the very fine and busy recessed rivets and fastener circles on the centre section of the lower wing.

The wheel wells are really nicely detailed between the upper wing halves.

The main wheels are moulded as one piece each and are nicely detailed. Tyre tread is smooth. The wheels are subtly bulged and flattened.

The tail wheel and strut are moulded as a single part. Detail looks good.

Ordnance includes a pair of drop tanks, 100 kg bombs an a single 250 lb bomb. The bomb offers a hand grip on one pair of the fins to make installation easier. The grip is simply snapped off and cleaned up after the glue sets.

Clever!

The canopy parts are thin and clear.

Instructions are supplied as a eight page stapled A5-sized booklet.

The kit is packed into a end-opening cardboard box. I have to say that I have never been a fan of end-opening boxes - access to the parts is more difficult, loose parts can easily be lost while retrieving instructions or a larger sprue, and the format is less structurally rigid, inviting the contents to be crushed when the box is inevitably at the bottom of a pile of kits.

I know it is a nit-pick but I would prefer to see future Arma Hobby releases in a lid-style of box.

Marking Options

The kit decal sheet offers markings for three striking IJAAF Special Attack Squadron options.

Optional tail markings are offered for the 57. Shimbu-tai aircraft are included. One has a yellow background.

Stencil markings are printed on the same single sheet, as are propeller logos and wing walk markings. You'll need to paint your own yellow wing leading edges though.

Colour callouts are provided for FS numbers and model paint numbers from a wide variety of companies – Hakata, AK, Mr Paint, AMMO, Mr Collor, Vallejo and Tamiya.

Decals are printed by Techmod. They are glossy, colours are well saturated and everything is in perfect register.

Arma Hobby's 1/72 scale Nakajima Ki-84 Hayate is very impressive kit with its crisp surface textures, high moulding quality, thoughtful parts breakdown and a very high level of detail.

The inclusion of masks is a welcome touch.

This is another excellent offering from Arma Hobby..

Thanks to Arma Hobby for the sample

Review Text and Images Copyright © 2023 by Brett Green
Page Created 2 March, 2023
Last updated 3 March, 2023

Back to HyperScale Main Page

Back to Reviews Page