Resin2detail produces 3d printed resin parts in 1/72, 1/48 and 1/32 scale for a wide range of WWII aircraft upgrades.
Today we will be looking at their A-26 Invader Pilot's Seat in 1/48 scale. This seat will be applicable to the Revell-Monogram and ICM kits.
They don't come much simpler than this. The seat is supplied as a single 3D printed resin part but this does not imply any lack of detail.
Braces, arm rest and supporting frame are all printed in place. The seats are presented without harness straps so you can choose your favourite belts.
Cleanup of the narrow orinting attachment points should be fast and easy. You'll have no trouble if you have used 3D printed parts before.
RESIN2detail's A-26 Invader Pilot's Seat will deliver a real improvement in the cockpit of your Revell-Monogram or ICM Invader kits. You won't have any difficulty preparing and installing this seat if you have worked on 3d parts before. This will be a nice finishing touch for your 1/48 scale Invader.
Thanks to RESIN2detail for the review samples
Text and Images Copyright © 2023 by Brett Green
Page Created 21 April, 2023
Last updated
21 April, 2023
Back to HyperScale
Main Page
Back to Reviews Page