Home  |  What's New  |  Features  |  Gallery  |  Reviews  |  Reference  |  Forum  |

Spitfire Mk.IXc, CH-54A & Eurofighter Typhoon Undercarriage Legs Updates

PREVIEW

Aerocraft Models
1/24 and 1/32 scales

 

Preview

 

Aerocraft Model has sent information and images of their three latest releases:

SUPERMARINE SPITFIRE MK.IXC BRASS UNDERCARRIAGE FOR THE 1/24 AIRFIX KIT. £20.00

https://aerocraftmodels.bigcartel.com/product/supermarine-spitfire-mk-ixc-brass-undercarriage-for-the-1-24-airfix-kit

 

 

This is a new set of brass undercarriage with the main parts cast up from the kit parts, added to this I have added new 3D printed parts for the scissor links that have a little more detail and finesse.

Note you will need to clean up some casting sprue gates from the parts and the odd small brass 'inclusions' that may appear through the casting process.

 

 

Please allow up to 2 to 3 weeks for manufacturing.


 

SIKORSKY CH-54A TARHE BRASS UNDERCARRIAGE SET FOR ICM. £17.00

https://aerocraftmodels.bigcartel.com/product/sikorsky-ch-54a-tarhe-brass-undercarriage-set-for-icm

 

 

This is a new set of brass undercarriage with the main parts cast up from the kit parts, added to this I have added new 3D printed parts for the scissor links that have a little more detail and finesse. As a bonus I have included 8 new tie down hoops, only 4 are required, but they are very small and delicate so extras are included.

Note you will need to clean up some casting sprue gates from the parts and the odd small brass 'inclusions' that may appear through the casting process.

Please allow up to 2 to 3 weeks for manufacturing.


 

EUROFIGHTER TYPHOON NOSE WHEEL UNDERCARRIAGE STRUT FOR TRUMPETER. £8.00

https://aerocraftmodels.bigcartel.com/product/eurofighter-typhoon-nose-wheel-undercarriage-strut-for-trumpeter

This is the nose wheel strut for the Trumpeter Typhoon. This is a copy of the main part supplied in the kit. The kit supplies a lot of very small and fine details that could not be easily cast in brass, so it was elected to leave them for the modeller to fit from the kit parts to the brass strut that will offer the strength needed.

 

 

Note you will need to clean up some casting sprue gates from the parts and the odd small brass 'inclusions' that may appear through the casting process.

Please allow up to 2 to 3 weeks for manufacturing.

Thanks to Aerocraft Models for the information and images.


Preview Text and Images Copyright © 2023 by Aerocraft Models
Page Created 4 April, 2023
Last updated 4 April, 2023

Back to HyperScale Main Page

Back to Reviews Page