Barracuda Studios
Oct 2021 New Releases

Available Now!

1/48 & 1/32 scales

Barracuda Studios is proud to announce 8 new products in 1/48 and 1/32 scales. This batch is very heavily Messerschmitt 109G centered, with the exception of the early cowl for the Spitfire Mk IX. Why? Because people love building 109s! There seems to be a never ending thirst for modelling Willy's remarkable fighter.

3 sets are focused on Tamiya's beautiful G-6 in 1/48th scale. It's a great kit, but with a few simple upgrades, your's will stand out from the pack. And our simple new conversion set opens up scores of schemes not possible with the kit built out of the box.

All sets are in stock on the Barracuda website and ready to purchase now.

Happy modelling!  Roy

BR48368 - 1:48 scale Bf 109G-6 Horizontal Tailplanes w Separate Elevators (Tamiya)

This set contains a new resin horizontal stabilizer w separate elevators. Most 109Gs have elevators hanging in the down position when parked, unless control locks were fitted.

Directly replaces the kit tailplanes for the Tamiya Bf 109G-6.

A simple upgrade to add life to your Gustav. Master pattern by Roy Sutherland. 

BR48369 - 1:48 scale Bf 109G-6 and G-14 Variants Conversion (Tamiya)

The beautiful Tamiya G-6 has one main problem: it's seriously limited in the number of schemes it can be built with due to a lack of alternate parts. This set supplies you with a tall fin and two different rudders, as well as the compressor bulge fitted to the starboard buele of Erla built G-5s and some G-6s. A battery box cover for the rear bulkhead rounds out the set.  An Erla canopy hood can be sourced from another kit (Eduard) or as a vacform.

This set allows you to build a whole range of G-6 and G-14 sub-variants from the Tamiya kit. It assumes a working knowledge of the Gustav variants, as a full description of all the variants and all the changes is outside the scope of a set like this. An easy installation! Master pattern by Roy Sutherland

BR48370 - 1:48 scale Bf 109G-6 and G-14 Seat with Molded In Belts  (Tamiya) 

Contains a new cockpit rear bulkhead, featuring a superdetailed seat with accurate and naturally draped molded-in seat belts.

If you struggle with bending and gluing down etched seatbelts, trying to make them look natural, only to have them look a bit two-dimensional, this is a simple and easy to install fix. Minor cutting and gluing required. 

Replaces kit seat rear bulkhead for Tamiya’s Bf 109G-6.

Master pattern by Roy Sutherland.

BR48372 - 1:48 scale Bf 109G-2 Though G-10 Seat with Molded In Belts  (Eduard)

This set contains a new cockpit floor and rear bulkhead, featuring a superdetailed seat with accurate and naturally draped molded-in seat belts. If you struggle with bending and gluing down etched seatbelts, trying to make them look natural, only to have them look a bit two-dimensional, this is a simple and easy to install fix. 

Directly replaces kit seat and floor for Eduard’s Bf 109G/K. Master pattern by Roy Sutherland.

BR32460 - 1:32 scale Spitfire Mk IX Early (Small) Carburettor Intake

Contains new resin lower engine cowling with an accurate early style carburettor intake to allow you to build the earlier Spitfire IXs from the Revell kit. The early intake is not included in the box.

A quick and easy conversion that opens up a lot of marking possibilities.

Master patterns by Roy Sutherland.

BR32470 - 1:32 scale Bf 109G Standard Tailwheel with Boot (Revell)

This set consists of a new resin standard Bf 109G tailwheel strut with molded in leather boot and detailed tailwheel to replace the uncovered Revell Bf-109G standard tailwheel strut. A simple plug and play installation.

Designed for the Revell Bf 109G kits, but can be modified to fit any 1/32 Gustav kit. Master pattern by Roy Sutherland.

BR48371 - 1:32 scale Bf 109F,G and K Aileron Mass Balances

This set consists of 4 sets of resin cast aileron mass balances (or 3 sets and a couple of spares) to replace lost, broken kit or crude parts. Can be fitted to any 1/32nd kit of the Bf 109F, G or K. Simple installation.

Master pattern by Roy Sutherland.

BR32365 - 1:32 scale Bf-109G Cockpit Stencils, Placards with Instrument Panel

This set consists of a decal sheet that gives you all the small stencils and placards typically found in Bf 109G cockpits. It also includes a beautifully detailed resin instrument casting that can be painted up and a choice of two different printings of the instrument faces:

Scale instrument markings that are very fine, and another more bold set if you prefer them to be more visible. It even includes 2 different marking styles for the O2 regulator.

Crazy fussy stuff, but if you want a really interesting cockpit, these will surely inject some life into yours.

Decals by Chris Busbridge, Panel by Kerry Carlyle. Complete with detailed color instructions.

For all Bf 109G kits.

All new products are available right now from Barracuda Studios' website

Happy modelling! Roy

www.barracudacals.com

Thanks to Barracuda Studios for the images and information

Barracuda Studio products are available online from their website

Text and Images Copyright © 2021 by Barrcuda Studios
This Page Created on 21 October, 2021
Last updated 22 October, 2021

Back to HyperScale Main Page