November 2025 New Releases Preview

Available Now!

Barracuda Studios

1/72 and 1/48 scales

BR72531    1/72    Mosquito B Mk. XVI Bomb Bay – Closed

The Airfix 1/72 Mosquito B Mk XVI (bomber variant) is a very accurate kit, with the exception of the bulged bomb bay. The bomb doors and rear fairing are actually for a target tug. It's a good amount of work for the modeller to correct this. This set contains an accurate, closed, bulged bomb bay with front and rear fairings, with a separate, open entry hatch. . Designed for the Airfix B Mk XVI. CAD by Mike O'Hare.

BR72532    1/72    Mosquito Mk XVI Cockpit Snapshot Upgrade

This set consists of new, detailed pilot's and navigator's seats, complete with molded-in late war harness, radios, throttles, Gee unit, control column, floor section with cutout for the separate entry hatch, and switchboxes with cable runs.  Cockpit can be configured with or without the Gee navigation units..This set does not replace the whole cockpit, but gives you all the major details in a quick and easy to install format. Designed for Airfix PR/B Mk XVI kits, but can be adapted for use in the Matchbox and Special Hobby kits. CAD by Mike O'Hare

BR72533    1/72    Mosquito B MK XVI Bomb Bay – Open

The Airfix 1/72 Mosquito B Mk XVI (bomber variant) is a very accurate kit, with the exception of the bulged bomb bay. The bomb doors and rear fairing are actually for a target tug. It's a good amount of work for the modeller to correct this. This set contains an accurate, bulged bomb bay, with front and rear fairings, open bay doors, and a separate, open entry hatch. The bomb doors have detail inside and out and have accurate u-shaped hinges. Designed for the Airfix B Mk XVI. CAD by Mike O'Hare.

BR72534     1/72    Mosquito Mk XVI 4000 lb. HC Cookie". Mk I and II

The Airfix B Mk XVI is a great little kit, but they left out the iconic 4,000 lb "Cookie" blast bomb so often carried by these aircraft. This set consists of two accurate, detailed 4000 lb HC Cookies, a Mk I and a Mk II. Both are complete with separate arming fuses and sway braces for nounting in the bulged bomb bay. Designed for Airfix B Mk XVI Mosquito, but can be used for any British aircraft that could carry the 4,000 lb. Cookie. A simple to assemble and install upgrade. CAD by Mike O'Hare.

BR72535     1/72    Gloster Meteor MK 8/9 Landing Gear

This set contains all new super detailed, 3D printed one piece main gear legs, nose gear leg, and accurate, detailed wheels featuring circumferential tread, detailed hubs, and raised tire data. The kit gear, while generally accurate, is oddly designed and a bit lacking in finesse. This set is a drop fit replacement for the kit parts and will make a big difference in the detail level of your kit. For Airfix Meteor 8/9 kits, but can be converted for use on other later mark 1/72 Meteor kits. CAD by Mike O'Hare.

BR48536     1/48    Gloster Meteor MK 8/9 Landing Gear

This set contains all new super detailed, 3D printed one piece main gear legs, nose gear leg, and accurate, detailed wheels featuring circumferential tread, detailed hubs, and raised tire data. This set is a drop fit replacement for the kit parts and will make a big difference in the detail level of your kit. Designed for the Airfix Meteor 8/9 kits, but can be converted for use on other later mark 1/48 Meteor kits. CAD by Mike O'Hare.

BR48539     1/48    Storm Shadow Pylons for SU-24 Fencer

This set consists of a pair of accurate, detailed pylons fitted to Ukrainian Su-24Ms for carrying SCALP/Storm Shadow missiles, as fitted to Ukrainian Fencers from about 2023. Simple one piece casting is a quick and easy installation. For Trumpeter and Mir kits.

BR72540     1/72    Storm Shadow Pylons for SU-24 Fencer

This set consists of a pair of accurate, detailed pylons fitted to Ukrainian Su-24Ms for carrying SCALP/Storm Shadow missiles, as fitted to Ukrainian Fencers from about 2023. Simple one piece casting is a quick and easy installation. For Trumpeter, Zvezda kits.

All new products are available right now from Barracuda Studios' website

Happy modelling! Roy

www.barracudacals.com

Thanks to Barracuda Studios for the images and information

Barracuda Studio products are available online from their website

Text and Images Copyright © 2025 by Barracuda Studios
This Page Created on 19 November, 2025
Last updated 19 November, 2025

Back to HyperScale Main Page