Focke-Wulf Fw 190 A-8/R2 Weekend Edition

Eduard, 1/48 scale

Reviewed by Brett Green

Eduard's 1/48 scale Focke-Wulf Fw 190 A-8/R2 will be available online from Squadron.com
 

By 1943, American B-17 bombers had effectively penetrated the Third Reich's air defences.

Even without a fighter escort, a single "Flying Fortress" could direct fire from 12 x .50 calibre heavy machine guns at an attacking aircraft. A new method was therefore devised that would offer a better chance of survival and success for Luftwaffe fighters. By attacking in a group from the rear at close quarters, a formation of fighters could dilute the defensive capabilities of a "vierbomber" by spreading fire across several aircraft. Furthermore, greater firepower would be brought to bear on the vulnerable wings and engines of the B-17 by this group of attacking fighters.

There seems little argument about the logic of this tactic proposed by Hauptman von Kornatzi. However, he also proposed that fighters should ram the bombers when they ran out of ammunition. This was not rhetoric - the pilots of the new unit were volunteers who understood the requirement and had to sign a pledge to fulfill it. 

The Focke-Wulf Fw 190A-8/R2 and R8 variants were designed as the ultimate heavily armed and armoured anti-bomber aircraft to execute this dangerous but vital duty. The heavy cowl ring and air-cooled engine already suited the Fw 190 to the task. Typical additional equipment included 30mm cannon fitted to the wings; with supplementary steel plates on the fuselage and thick armoured glass secured to the canopy. Some R2s had their cowl machine guns removed and the troughs faired over, while others were fitted with air-to-air rockets.

There were a number of variations in armour and armament to this basic configuration. Also, many Fw 190A-8/R2s and Fw 190A-7/R2s were fitted with similar equipment. Eduard's new model will be suitable for these variants with minimal modifications, so check your references carefully!

Eduard released their Royal Class offering of the heavily armed and armoured Focke-Wulf Fw 190 A-8/R2 Sturmbock in March 2007. This remarkable package contained two complete kits plus seven photo-etched frets, canopy and wheel masks, markings for nine aircraft, a genuine fragment from a Focke-Wulf Fw 190 A-8/R2 (markings for this specific aircraft are included on the decal sheet), a replica Iron Cross with Oak Leaves and ribbon, plus an eight page, all colour booklet entitled "Bloody Encounter Over a Forgotten Mountain".

This was a limited edition with a price tag of $160, which was not unreasonable considering the unique contents but will have put this popular Wurger out of the reach of many modellers' budgets.

This was followed six months later with a single Sturmbock as part of Eduard's standard lineup at the very reasonable price of $39.99.

Now Eduard has completed the Sturmbock Trinity with their Weekend Edition Fw 190 A-8/R-2, this time at the bargain price of just $22.95. The main differences between the standard and Weekend editions is that the Weekend edition leaves out the photo-etched parts and offers a single marking option. Otherwise, the plastic parts are the same as the Royal Class and standard kits.

Eduard's 1/48 scale Focke-Wulf Fw 190 A-8/R2 Weekend Edition comprises around 170 parts in olive coloured plastic; 8 parts in clear; markings for one aircraft and instructions.

Apart from the new parts specific to the R2 Sturmbock variant, the plastic parts are the same as the earlier excellent A-8.

Check the earlier reviews for specifics, but in summary these kits feature superb surface texture, a high level of detail, worthwhile options including centreline bomb or drop tank, W.Gr.21 rockets and different styles of canopies.

Clear parts emphasize Eduard's innovation. Two styles of canopy are included - flat and blown - and two of each are attached to the clear sprue. On the real Würger, the canopy was somewhat flexible. This flexibility was further enhanced with a short hinge on the top. This was necessary because the canopy rails tapered inwards back along the fuselage, requiring the front bottom corners of the canopy to pinch inward when opening (ie, the width was narrower when the canopy was open). This attribute has been conveniently ignored by all Fw 190 models to date - an open canopy would simply overhang the sides of the canopy deck. Eduard, however, has supplied a closed (wide) and open (narrow) version for each canopy style. Clever stuff.

Markings are provided for one aircraft:

• Wilhelm Moritz; IV.(Sturm) / JG 3, Memmingen, Germany, July 1944

Decals look to be very thin and of high quality.

In common with the Royal Class offering, you may also easily backdate this kit to a Fw 190 A-7/R2 by taking the following steps:

• Use the short centreline rack (Part K23)

• Use cowling parts H10, H14 and H26 (these depict the earlier "two up, one down" top fastener arrangement)

• Fill the oval hatch under the fuselage (actually on the trailing edge of the bottom wing, Part E1)

• Fill one more hatch each on the port and starboard fuselage side

• Relocate the fuel filler hatch

• Relocate the pitot inboard to mid-wing

Check your references for exact locations of hatches and pitot.

In common with the other Wurgers in Eduard's 1/48 scale Focke-Wulf Fw 190 A series, this kit is cleverly engineered and beautifully detailed, inside and out.

Keep in mind, though, that Eduard's 1/48 scale Fw 190 kits are not "shake and bake". Modelling skills are required. You will be advised to allocate plenty of time to test fit and make sure that all the parts are aligned correctly before committing to glue. If you have already assembled a few kits, however, you should not have any trouble finishing this wonderful Würger, as we have seen in several HyperScale Galleries over the last few years.

Highly Recommended.

Thanks to Eduard for the sample

Review Text Copyright © 2010 by Brett Green
Page Created 18 August, 2010
Last updated 18 August, 2010

Back to HyperScale Main Page

Back to Reviews Page