Super Glue Debonder
Four-Grade Sanding Stick

CMK

Reviewed by Mick Evans

HyperScale is proudly supported by Squadron.com

H1012 Debonder for superglue

This debonder solution produced by CMK is designed for debonding and removing all superglue variants from plastic and resin model kits. 

The solution does not affect the plastic and resin. 

When put to the test the solution broke down both 5 year old and newly cured superglue joints and spillage.  The solution was applied with a cotton bud/Q tip and the glue quickly turned from its hard crystalised form into and easily removable gel.  The plastic and resin parts were not affected.

H1101 4 Grade Sanding Stick

This product from CMK is a sanding stick that contains 4 sanding grades,  extra fine, fine, medium and coarse. 

Having said that, the fine is not ultra fine but probably equivalent to 1200 grit while the coarse is equivalent to approximately 150 grit.

Having all four on one stick will be convenient but could be a pain if some grades are worn out before other grades. The grit is incredibly sharp and does sand plastic very fast. 

I found this to be a very useful and convenient sanding stick.

Thanks to CMK for the review products

Text and Images Copyright © 2008 by Mick Evans
Page Created 28 August, 2008
Last updated 28 August, 2008

Back to HyperScale Main Page

Back to Reviews Page