Reviewed by Mick Evans

HyperScale is proudly sponsored by Meteor Productions

Cutting Edge has introduced another fine quality decal sheet depicting schemes for F100D Super Sabres nicknamed the Hun. This is the second sheet in the limited edition series.

The decals are designed for the Trumpeter 1/32 scale kit. The decals are superbly printed with good colour saturation and excellent register. As usual the carrier film is ultra thin and my experience with Cutting Edge decals that I have used in the past is that the decals have to be handled carefully and snuggle down into the surface detail well. I always use decal setting solution but this is not necessary. The carrier film then almost totally disappears under a coat of clear.

Very few data decals are provided so you may need to refer to the kit decal sheets for these but full national markings are supplied for the aircraft as follows:

• F-100D-25-NA 55-3637 of the 20th TFW based at RAF Wethersfield Essex England. This aircraft was finished in overall natural metal with red, yellow and blue trim.

Highly Recommended
 

Thanks to Cutting Edge Modelworks for the preview information and image

Review Copyright © 2007 by Mick Evans
This Page Created on 20 November, 2007
Last updated 24 December, 2007

Back to HyperScale Main Page

Back to Reviews Page