Hurricane Mk.IIb/c
Model Kit

Arma Hobby, 1/72 scale

Reviewed by Brett Green

The Hurricane Mk.II was powered by the improved Merlin XX engine with a two-speed supercharger. The new engine was longer than the earlier Merlin and so the Hurricane gained a 4.5 in "plug" in front of the cockpit, which made the aircraft slightly more stable due to the slight forward shift in centre of gravity.

Initially called the Hurricane IIa Series 2, the Hurricane Mk.IIb was essentially a Mk.II fitted with racks allowing it to carry two 250 lb or two 500 lb bombs. This lowered the top speed of the Hurricane to 301 mph (484 km/h), but by this point mixed sweeps of Hurricanes carrying bombs, protected by a screen of fighter Hurricanes were not uncommon.

The same racks allowed the Hurricane to carry two 45 gallon (205 litre) drop tanks instead of the bombs, nearly doubling the Hurricane's fuel load.

The Hurricane Mk IIa Series 2 was fitted with a new and slightly longer propeller spinner, and four additional wing-mounted .303 in (7.7 mm) Browning machine guns; for a total of 12 guns. The first aircraft were built in February 1941 and were renamed Mk. IIb in April 1941.

A total of 3,050 IIb built to November 1942, 1,883 by Hawker, 867 by Gloster Aircraft Company and 300 by Austin Aero Company.

The Hurricane Mk.IIc was equipped with a new and slightly longer propeller spinner, and fully replaced the machine-gun armament with four 20 mm (.79 in) Hispano Mk II cannons, two per side.

A newly designed wing included a hardpoint for a 500 or 250 lb (230 or 110 kg) bomb and, later in 1941, fuel tanks.

By then, performance was inferior to the latest German fighters, and the Hurricane changed to the ground-attack role, sometimes referred to as the Hurribomber.

The mark also served as a night fighter and intruder with about three quarters converted to fighter bombers.

There were 4,711 Hurricane Mk.IIcs built by Hawker between February 1941 and July 1944.

Arma Hobby had already released six 1/72 scale Hurricane Mk.I and Mk.IIc kits when they added a Hurricane Mk.IIb/c kit to the lineup late in 2020. That most recent kit was the first time that Arma had offered a Mk.IIb, and it was in their premium Expert Series.

This series comes with photo-etched parts and self-adhesive masks, but it also comes with a higher price tag.

Now, for those on a budget, Arma Hobby has just released a 1/72 scale Hurricane Mk.IIb in the Model Kit series at a significantly lower price.

The Model Kit series just provides the basics - plastic parts (albeit very nice plastic parts) and decals for two marking options.

The bonus here is that we are actually provided with all the parts to make a Hurricane Mk.IIB or IIc - just add decals.

Arma Hobby's 1/72 scale Hurricane Mk.IIb Model Kit comprises 72 parts in grey plastic, eight parts in clear plastic and markings for two aircraft.

• 
• 
• 
• 
• 

• 
• 
• 
• 
• 

Thumbnail panels:

The flimsy end-opening box is topped by attractive artwork.

The grey plastic parts are delivered on one large and one smaller sprue. The large sprue provides the fuselage, the Mk.IIc cannon wing and many detail parts.

The second sprue contains the Mk.IIb wing, alternative exhausts, two 250lb bombs and wing mounts, two styles of tail wheel and two cylindrical drop tanks.

Moulding quality is excellent, with no flash, flaws or visible moulding imperfections on my sample.

The larger parts are moulded with a satin finish. Surface textures are just gorgeous. Panel lines, raised fastener heads and other structural details are very fine.

The fabric texture on the rear fuselage and tail surfaces are particularly subtle and impressive.

The fuselage is supplied as left and right halves with the fin supplied as a separate part.

Some details are moulded directly to the inside of the fuselage and onto the wing.

These are supplemented by a plastic framework, the "bottomless" floor with foot rests, rudder pedals, control column and more.

The upper and lower wings for both the IIb and IIc are moulded as full span.

Wheel wells are nicely detailed. Main wheels are one piece each in injection moulded plastic.

A Rotol propeller assembly and spinner are included.

Two different styles of cannon barrels are included, as is an optional Vokes tropical filter.

Arma supplied a new and improved clear sprue with the provious Hurricane release in response to comments that the original canopy parts were overly thick. These are also included in this kit.

If you own an earlier Arma Hurricane release, the new clear sprue may also be purchased separately for €2.50 for the earlier issues of the Arma Hurricane.

The canopy is quite clear and offers separate parts for the windscreen and the sliding section. Two sliding sections are included - one for the closed position and a wider one to display the canopy open and show off all that lovely detail.

Clear landing lights for the wing leading edges are included too.

Optional wing tip navigation lights are also supplied, but you'll have to cut out the solid plastic on the wing tips before fitting these.

Instructions are supplied in an eight page stapled A5-sized booklet. Assembly is described using clear diagrams.

The kit is packed into a side-opening cardboard box. I am not a fan of side-opening boxes - access to the parts is more difficult, loose parts can easily be lost while retrieving instructions or a larger sprue, and the format is less structurally rigid, inviting the contents to be crushed when the box is inevitably at the bottom of a pile of kits. I know it is a nit-pick but I would prefer to see future Arma Hobby releases in a lid-style of box.

Marking Options

Two marking options are included. One is a day fighter-bomber "Hurribomber", and the other is an all-black night fighter.

Colour callouts are provided for FS numbers and a good selection of model paint numbers including Hakata, AK, Lifecolor, AMMO, Humbrol, Vallejo and Tamiya.

Decals are printed by Techmod. They are glossy, colours are well saturated and everything is in perfect register.

Arma Hobby's 1/72 scale Hurricane Mk.IIb is another delightful offering from Arma Hobby - excellent surface texture, moulding quality, detail and inclusions.

With all the parts that you will need for a Mk.IIb or Mk.IIc, plus the recently improved canopy and markings for two aircraft, if you're on a budget and you're looking for the best value Hurricane in 1/72 scale, look no further!

Thanks to Arma Hobby for the sample

Review and Images Text Copyright © 2021 by Brett Green
Page Created 19 April, 2021
Last updated 20 April, 2021

Back to HyperScale Main Page

Back to Reviews Page