2-in-1 WWII Luftwaffe Hangar (Inside) Sets

Noy's Miniatures
1/144, 1/72, 1/48 & 1/32 scales

HyperScale is proudly supported by Squadron.com

Noy Pines has sent the following images and information about a new release:

We've added a new offering to the Noy's Miniatures range: 2-in-1 WWII Luftwaffe Hangar (Inside) Set. It is currently offered in 1/32, 1/48, 1/72 & 1/144 scales.

• 
• 
• 
• 
• 

• 
• 
• 
• 
• 

• 
• 
• 
• 
• 

• 

Thumbnail panels:

This innovative set of 6 prints (3 for 1/32) depicts the inside area of a typical WWII Luftwaffe hangar and provides the modeller with 2 options: A fighter display and a bomber display (utilizing the extension set included). Also included, FREE OF CHARGE, is an accessory detail set that enables to add boxes, drums, posters etc. to the hangar inside (not applicable to 1/32).

Item 144036 "2-in-1 WWII Luftwaffe Hangar (Inside) Set"

Six 1/144 sheets as follows:

• Floor Component I: 9.3 cm / 3.7 inch x 13.2 cm / 5.2 inch;
• Floor Component II: 18.6 cm / 7.3 inch x 13.2 cm / 5.2 inch;
• Wall Component I: 13.2 cm / 5.2 inch x 5.7 cm / 2.2 inch;
• Wall Component II: 9.3 cm / 3.7 inch x 5.7 cm / 2.2 inch;
• Wall Component III: 9.3 cm / 3.7 inch x 5.7 cm / 2.2 inch;
• Accessory Detail Set: 7.4 cm / 2.9 inch x 5.3 cm / 2.1 inch.

Item 7236 "2-in-1 WWII Luftwaffe Hangar (Inside) Set"

Six 1/72 sheets as follows:

• Floor Component I: 18.6 cm / 7.3 inch x 26.3 cm / 10.35 inch;
• Floor Component II: 18.6 cm / 7.3 inch x 26.3 cm / 10.35 inch;
• Wall Component I: 26.3 cm / 10.35 inch x 11.3 cm / 4.4 inch;
• Wall Component II: 18.6 cm / 7.3 inch x 11.3 cm / 4.4 inch;
• Wall Component III: 18.6 cm / 7.3 inch x 11.3 cm / 4.4 inch;
• Accessory Detail Set: 14.8 cm / 5.8 inch x 10.5 cm / 4.1 inch.

Item 4836 "2-in-1 WWII Luftwaffe Hangar (Inside) Set"

Six 1/48 sheets as follows:

• Floor Component I: 39.5 cm / 15.6 inch x 28 cm / 11.02 inch;
• Floor Component II: 39.5 cm / 15.6 inch x 28 cm / 11.02 inch;
• Wall Component I: 39.5 cm / 15.6 inch x 17 cm / 6.7 inch;
• Wall Component II: 28 cm / 11.02 inch x 17 cm / 6.7 inch;
• Wall Component III: 28 cm / 11.02 inch x 17 cm / 6.7 inch;
• Accessory Detail Set: 21 cm / 8.27 inch x 14.8 cm / 5.8 inch.

Item 3236 "2-in-1 WWII Luftwaffe Hangar (Inside) Set"

Three 1/32 sheets as follows:

• Floor Component: 84 cm / 33.1 inch x 59.25 cm / 23.33 inch;
• Wall Component I: 84 cm / 33.1 inch x 25.25 cm / 9.9 inch;
• Wall Component I: 59.25 cm / 23.33 inch x 25.25 cm / 9.9 inch.
• Plotter-printed on heavy paper (Not cardstock), this 1/32 set will be shipped rolled in a sturdy carton tube, just like a poster.

All available to order via email from noypines@netvision.net.il

Thanks to Noy Pines for the images and information

Back to HyperScale Main Page

Back to Reviews Page